With the development of science and technology, the thief's unlocking technology is also getting higher and higher. Ordinary mechanical locks have been unable to stop the invasion of these illegal elements. Nowadays, a smart lock without a keyhole is available in the market. This smart lock can realize keyless door opening and mobile remote door opening. It also has monitor monitoring function and illegal door opening alarm system. So how do we install it after we have purchased a keyless smart lock? The following method is shared to everyone.
Keyless smart lock installation method
1. Before installation, confirm the status of the lock and confirm whether the installation conditions on the site meet the installation requirements. For example, whether there is a power supply, whether there is a specialist.
2. When installing, you should complete the reversal of the handle and first determine the opening direction of the door, which is left open or right open. Reversing method: Use a screwdriver to loosen the screw, and then gently pull out the handle, rotate 180 degrees, and then reset, and then tighten the screw with a screwdriver, and the reversing of the handle is completed.
3, should increase the stud and sleeve nut, the screw and the sleeve nut screw increases into the screw hole outside the smart remote locking lock plate. In addition, take the door line and the cable, insert one end of the socket from the second hole above the lock body straight through the other side of the door, and dock with the corresponding line socket to determine that the lock switch of the smart lock without a lock is turned off. Dial to ON.
4. The slotted end of the lock core shaft corresponds to the direction of the inner lock plate, is installed in the lock body hole, and is locked with a lock core screw. Then take the square shaft and insert one side of the teeth into the square hole of the lock body.
5, after the completion of the assembly, should be tested to unlock the sensitivity, turn the handle to see if it can normally rotate, not locked; open the door with a mechanical key, whether it can open properly.
The above content is the installation method of the lock-free smart lock, and the basic steps are similar to the ordinary smart lock installation method. Keyhole-free Smart Locks truly prevent technology from unlocking, and friends who like such smart locks can install and replace them according to the above methods.
